Novak Sentry Data Logger Manual de usuario descargar pdf (Pagina 14)

Novak Electronics, Inc. | Device Setup

www.teamnovak.com

INPUT HARNESS SENSOR

Sensor Description: The Input Sensor Harness monitors the throttle or steering position.

Measurement Range: -100% to 100%, 0 = neutral

Plugs Into: The 3-pin connector plugs into the first or second slot in the

Novak Sentry Data Logger unit with the black wire toward the outside/left

edge of the case.

Default Settings (configurable setting):

 Graph Color:

 Max Value (Gauge display only): NA

 Name String: Throttle

Installation Instructions (refer to images shown right):

 To measure throttle position:

Make sure one of the input harnesses is connected to the throttle

channel of the receiver. The other harness should be connected to

the speed control.

 To measure steering position:

Make sure one of the input harnesses is connected to the

steering/servo channel of the receiver. The other harness should be

connected to the steering servo.

Replacement Part Number:

 Novak Kit #5315 (4 inch input harness)

 Novak Kit #5320 (9 inch input harness)

WARNING! One of these sensors must be plugged into the receiver. The Novak Sentry Data Logger

receives its power via the vehicle’s BEC or receiver pack.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 34 35

Sin comentarios

Novak Sentry Data Logger Manual de usuario Pagina 14